PROJANTA | SHINE EXTRA X 5 LTR | 2007
- Metallised floor polish for extreme strength and durability
- Non-yellowing polymer film to protect even light-coloured floors
- Produces a deep shine with excellent slip resistance
- Responds well to spray burnishing techniques
ProJanta Shine Extra 5L (2007) is a metallised floor polish built for extreme strength and durability. It forms a non-yellowing polymer film that won’t discolour even light floors, producing a deep shine with excellent slip resistance.
ProJanta Shine Extra 5L (2007) is a metallised floor polish built for extreme strength and durability. It forms a non-yellowing polymer film that won’t discolour even light floors, producing a deep shine with excellent slip resistance. Designed to respond brilliantly to spray burnishing techniques, it’s suitable for linoleum, PVC, rubber, sealed cork, sealed wood, terrazzo and thermoplastic floors. Supplied as a white emulsion, it should be applied in thin, even coats to a clean, grease-free floor for high-gloss protection.
Instructions for use
- Apply to a clean, grease-free floor
- Strip old polish with an alkaline stripper, then rinse thoroughly with clean water and allow the floor to dry
- Apply a thin, even film using a clean lint-free mop or applicator
- Apply a second coat when the first is dry
- Buff using a rotary machine for an extreme high-gloss finish and protection
SHINE EXTRA
Please be aware pH values may be approximated on a scale between two values, this table uses the most acidic value provided by manufacturer. Please refer to the provided Safety Data Sheet, or specification table below for approximate pH values. For diluted values, please refer to the SDS/COSHH document below.
Health & safety
- Ingestion: Do not induce vomiting. Rinse mouth and drink plenty of water (200–300ml). Do not give anything to drink if unconscious. Get medical attention immediately.
- Skin contact: Wash thoroughly with soap and water. Get medical attention if irritation persists after washing.
- Eye contact: Flush with plenty of water for up to 15 minutes. Remove contact lenses and hold eyes open. Get medical attention if discomfort continues.
- PPE required: Eye goggles and gloves
Storage
- Store in a cool, well-ventilated place
Where to use / Suitable for
- Polishing and protecting sealed hard floors in commercial environments
- Floors: linoleum, PVC, rubber, sealed cork, sealed wood, terrazzo, thermoplastic
- Sites using spray burnishing and rotary machine buffing for high-gloss maintenance
| Brand | ProJanta |
|---|---|
| Colour | White |
| Litreage | 5 LTR |
| Product Weight | 1 |










